FLOWMONSTER DAA AXIAL PUMP WOBBLE PLATE DIRECT DRIVE
MANIFOLD
Forged brass
CRANKCASE
Aluminum alloy, die-cast, anodized
WOBBLE PLATE
Aluminum forged
Cast iron(optional)
BEARING
Dual thrust bearing
PLUNGER
Solid stainless steel, heat treatment
Ceramic coating(optional)
PLUNGER SEALS
Germany Parker, U type
LUBRICATION
Splash type, oil type 15W-40
UNLOADER
Integrated with manifold, internal bypass trap type, built with detergent injector
INLET: 3/4inch BSP or NH thread
OUTLET: M22 male
SPECIFICATIONS
DAA-3025A
High Pressure Plunger Pump
BorexStroke: 15 x 6.3mm
Max.Power Rating: Up to 6.5hp
Working Pressure: 193Bar/2800psi
Max.Flow Rate: 11.3Lpm/3.0Gpm
Max.Input Rpm: 3400r/min
Head Material: Stainless Steel
Overall Dimension: 22x21x24cm
Shipping Weight: 4.4kgs
DESCRIPTION
| Pump Model: | | DAA-3025A |
| Bore/Plunger Dia.: | | 15mm |
| Stroke: | | 6.3mm |
| Fluid End/Manifold Material: | | Brass Forged |
| Version/Type: | | A Version,Engine Direct Drive |
| Flange Type: | | A(Fit for engine 6.5hp) |
| Shaft Dia.: | | Male shaft 3/4in,19.05mm |
| Max Input POWER: | | 6.5hp |
| Max Input RPM: | | 3400RPM |
| Port On Pump: | | Outlet M22 Male, Inlet G3/4” Female |
| Oil Bath Capacity: | | 550ml (half level of oil gauge) |
| Oil Type: | | SAE 15W/40 Non-Detergent |
| Water Inlet Pressure: | | 0-50psi/3.5bar |
| Max Inlet Water Temp.: | | 50℃/122℉ |
| Shipping Size.: | | 22x21x24cm |
| Shipping Weight.: | | 4.4kgs |
| Application: | | High Pressure Water |
DAA-2225C
High Pressure Plunger Pump
BorexStroke: 15 x5.4mm
Max.Power Rating: Up to 1.5kw
Working Pressure: 90Bar/1300psi
Max.Flow Rate: 8.2Lpm/2.2Gpm
Max.Input Rpm: 2880r/min
Head Material: Brass Forged
Overall Dimension: 22x21x24cm
Shipping Weight: 4.7kgs
DESCRIPTION
| Pump Model: | | DAA-2225C |
| Bore/Plunger Dia.: | | 15mm |
| Stroke: | | 5.4mm |
| Fluid End/Manifold Material: | | Brass Forged |
| Version/Type: | | AC Version,Motor Direct Drive |
| Flange Type: | | AC2(Fit for Motor 1.5kw) |
| Shaft Dia.: | | Hollow shaft 24mm;28mm |
| Max Input POWER: | | 1.5kw |
| Max Input RPM: | | 2880RPM |
| Port On Pump: | | Outlet M22 Male, Inlet G3/4” Female |
| Oil Bath Capacity: | | 550ml (half level of oil gauge) |
| Oil Type: | | SAE 15W/40 Non-Detergent |
| Water Inlet Pressure: | | 0-50psi/3.5bar |
| Max Inlet Water Temp.: | | 50℃/122℉ |
| Shipping Size.: | | 22x21x24cm |
| Shipping Weight.: | | 4.7kgs |
| Application: | | High Pressure Water |
DAA-2525C
High Pressure Plunger Pump
BorexStroke: 15 x6.3mm
Max.Power Rating: Up to 2.2kw
Working Pressure: 110Bar/1600psi
Max.Flow Rate: 9.6Lpm/2.5Gpm
Max.Input Rpm: 2880r/min
Head Material: Brass Forged
Overall Dimension: 22x21x24cm
Shipping Weight: 4.7kgs
DESCRIPTION
| Pump Model: | | DAA-2525C |
| Bore/Plunger Dia.: | | 15mm |
| Stroke: | | 6.3mm |
| Fluid End/Manifold Material: | | Brass Forged |
| Version/Type: | | AC Version,Motor Direct Drive |
| Flange Type: | | AC2(Fit for Motor 2.2kw) |
| Shaft Dia.: | | Hollow shaft 24mm;28mm |
| Max Input POWER: | | 2.2kw |
| Max Input RPM: | | 2880RPM |
| Port On Pump: | | Outlet M22 Male, Inlet G3/4” Female |
| Oil Bath Capacity: | | 550ml (half level of oil gauge) |
| Oil Type: | | SAE 15W/40 Non-Detergent |
| Water Inlet Pressure: | | 0-50psi/3.5bar |
| Max Inlet Water Temp.: | | 50℃/122℉ |
| Shipping Size.: | | 22x21x24cm |
| Shipping Weight.: | | 4.7kgs |
| Application: | | High Pressure Water |
|
|
FLOWMONSTER DAA AXIAL PUMP WOBBLE PLATE DIRECT DRIVE Images
|
